The P320 is a modular handgun that was first introduced in 2014. It has since become a popular choice among law enforcement agencies across the country.
The P320 comes equipped with a variety of accessories, including a threaded barrel and a compensator attachment. The latter is designed to redirect muzzle gasses away from the shooter, but it also serves as an effective noise suppressor.
If you’re looking to add a compensator to your P320 handgun, there are several options available on the market today.
The Best P320 Compensators
Agency Arms P320 Dual Port Compensator
The Agency Arms P320 Dual Port Compensator is a unique and practical accessory that increases your performance and accuracy with your Sig Sauer P320 pistol. This compensator was designed by a former Marine Special Ops sniper to help shooters get the most out of their weapon, and it’s been rigorously tested in the field.
This compensator has two ports on each side that allow gasses to escape in two different directions, which reduces muzzle flip, which makes it simpler to keep your sights on target and maintain accuracy as you fire. The Agency Arms is made from durable stainless steel and features an attractive black finish that will look great on any gun.
If you want to add some flair to your pistol without sacrificing performance, this is one accessory that you should definitely consider adding to your collection!
Springer Precision Shorty Compensator
The P320 has always been a modular platform, and the new Shorty Compensators from Springer Precision are a perfect example.
The Shorty Compensators are made from 17-4 stainless steel, giving them the strength to stand up to the abuse that comes with being attached to a pistol. The outer diameter is 1.25 inches, which allows for a more comfortable grip and higher cheek weld on your favorite AR-15 buttstock.
The front of each compensator has been fluted to reduce weight while leaving plenty of material behind to ensure durability. The flutes also serve as a heat sink when shooting suppressed or unsuppressed — they help dissipate heat into the air instead of transferring it directly onto the shooter’s hand.
The rear of each compensator features six ports that allow for muzzle rise compensation when shooting is suppressed or unsuppressed. Each port has been carefully calculated for maximum effectiveness without creating excessive recoil or muzzle flash during firing.
It’s designed to fit on the factory or extended slide release of your P320 pistol. The Ported is created with a unique internal design that reduces muzzle rise, even in rapid-fire scenarios. The ports in the top of the device direct gas to counter recoil, which helps reduce muzzle flip by as much as 50%. This compensator can be installed in minutes with just an Allen wrench and a few drops of Loctite Blue thread locker.
Springer Precision Open Compensator
The P320 Compensator from Springer Precision is a high-quality, durable and affordable compensator that fits both 9mm and .40 caliber P320 models. Made from 6061 T6 aluminum, the P320 Compensator features a 1/2×28 thread pitch and accepts 3/4″x10 silencers. The rear end of the compensator has been machined out for use with a threaded barrel spacer (not included). This allows for the compensator to be used on both pinned and unpinned barrels.
It is manufactured from 17-4 heat-treated stainless steel to ensure a lifetime of durability and performance. The open design allows for maximum flow, while machining marks on the inside of the compensator prevent gas and debris from entering into the firearm’s action.
The P320 Compensator is created to increase muzzle control, which can be especially beneficial on longer-barreled pistols like the P320 X5 Compensator (not included). It also reduces the rise of the muzzle and helps keep your sights on target during rapid-fire shots. The unique design of this accessory will give your pistol a custom look while helping you get more accuracy out of it when shooting at distance targets.
Tyrant Designs T-Comp Sig Sauer Compensator
The Tyrant Designs T-Comp Sig Sauer Compensator is created to fit the P320, P250, and P238. The T-Comp is constructed from 416 stainless steel and features a simple finish that is both attractive and functional. The muzzle device is designed for use on pistols without the need for a crush washer, so no specialty tools are required to install it. This means you can get your gun up and running quickly, which can be very important in competition.
The quality of construction on this compensator is excellent, but it also offers some unique features that set it apart from other options on the market today. First of all, there is no need for a crush washer because the device has been designed to fit onto your slide without one. This makes installation quick and easy.
Also, the design includes a taper crimp at the muzzle end so there are no sharp edges where gas could escape through that point. In fact, this does an excellent job of serving as an expansion chamber for gasses exiting the barrel through ports located along the side of the device which helps control muzzle flip during rapid-fire shooting sessions.
TRYBE Defense Double Port 9mm Compensator
The TRYBE Defense Double Port Compensator is made from stainless steel and heat treated to ensure strength and durability. It has a black oxide finish for added corrosion resistance, which can be removed by simply wiping it down after each use with a cloth soaked in gun oil or motor oil.
You won’t have any trouble fitting this suppressor onto your pistol because it comes with an adapter that allows you to use it on most pistols without having to change anything else about your weapon system other than installing the adapter itself onto the rail system of your weapon first before installing this suppressor over top of it next on top of that adapter as well.
The Pros Of Using A P320 Compensator?
The P320 Compensator is a device that attaches to the barrel of your pistol, and it can be used to reduce flash, and recoil. It’s a great option if you want to add some extra features to your gun without having to make any permanent changes.
The P320 Compensator has a few benefits for those who like to use their pistols for self-defense or competition shooting.
Reduces Muzzle Rise
One of the most important things of using a compressor is that it helps reduce muzzle rise. This makes it easier for you to control your pistol during rapid fire and allows you to get back on target quicker than with other types of devices or no device at all.
Reduces Flash Signature
Another benefit of using a P320 compensator is that it reduces flash signature. This makes it harder for an attacker or anyone else who may have night vision equipment or night vision scopes on their rifles or handguns to spot your location because they won’t see as much light coming from your muzzle blast as they would otherwise.
Reduces Recoil
Finally, one more benefit of using a P320 compensator is that it can help reduce recoil by as much as 40.
Is It Necessary Threaded Barrel For A P320 Compensator?
Sometimes, you want to add a muzzle device to your p320. This can be a flash hider, suppressor, or compensator. If you are adding a compensator or muzzle brake, it is important to know that these devices need a threaded barrel.
Why is this? The answer lies in physics. The purpose of any muzzle device is to reduce the recoil and muzzle flip experienced by the shooter. When the bullet leaves the barrel, it creates pressure waves that travel down the length of the barrel. These waves have both positive and negative effects on your shot.
The positive effect is that they help keep the bullet traveling straight through the air while it moves toward its target. The negative effect is that they can cause significant recoil that pushes your gun back toward you before it comes forward again during its cycle of fire.
Threading adds more surface area for these pressure waves to travel along before exiting the end of your barrel, which reduces their overall strength when hitting your shoulder and face during firing. This makes it easier on shooters who are sensitive to recoil because they reduce the amount of force pushing them back when firing each round.
Can a compressor reduce noises of a firearm?
The answer is yes and no, depending on what you’re shooting. If you’re shooting a small caliber pistol or rifle, adding a compensator to your weapon won’t really reduce any noise level at all. This is because the powder burns in an instant and there’s no way compressors do anything about that. The only thing it does is make the muzzle rise slightly, which may or may not be desirable.
However, if you are shooting larger calibers like .308 or .45-70 then a compensator can definitely reduce noise. A large part of the noise from these rounds comes from the gasses escaping from the barrel as they are forced back by the expanding gasses behind them. A compensator redirects those glasses so that they follow a more direct path out of the barrel instead of flowing around it. This allows them to escape faster and produces less sound pressure in front of them.
Do P320 Compensators Work With Suppressors?
The P320 compensator is created to reduce muzzle flips and felt recoil. The compensator is similar in design to the HK MP5SD suppressor, which is also known as a “flash hider.” The HK MP5SD uses a comp/flash hider that has a small hole in the top of it. The small hole allows gasses to escape from the barrel, which helps reduce recoil and muzzle rise.
The P320 compensator works by venting gas out of holes on the underside of the barrel. This helps reduce muzzle flips and felt recoil by allowing gasses to escape from underneath the barrel instead of through a small hole on top like most suppressors do.
So does this mean that you can use your P320 with a suppressor? Unfortunately, no. The problem with using a P320 suppressor is that there’s not enough room under your barrel for both items at once. The P320 compensator is created to be used with or without a silencer attached.
Conclusion
The P320 is a modular-framed pistol manufactured by Sig Sauer. It has been adopted by several law enforcement agencies in the United States, including the U.S. Army, Navy, and Marine Corps.
The P320 has been subject to multiple recalls since its release in 2014, and many of the models have been found to fire when dropped. Some of these issues have been addressed by Sig Sauer with new versions of their pistols, but others have not yet been resolved.
The P320 was designed as a modular platform that could be fitted with different sizes of frame and grip modules as well as barrels and slides. The frame is made from polymer reinforced with steel inserts at high-stress points for increased durability and resistance to breakage under heavy use conditions. The slide is stainless steel alloyed with nickel-Teflon for corrosion resistance and low friction properties, while the barrel is made from stainless steel alloys with a Nitron finish for wear resistance under extreme conditions.
We hope that, after reading our blog post, you’ll have a better idea of what variations of the P320 Compensator to choose. With so many available options, though, choosing can be tough. We encourage you to read through these options carefully and select the ones that fit your needs. Remember that compensators are designed exclusively for P320s, so they may not provide similar features to other pistol models.
